Document Actions
2011
As far as possible, links are given to the original sources.
Books
Vollertsen, F.
Thermal Forming and Welding Distortion - Proceedings of the IWOTE'11:
International
Workshop on Thermal Forming and Welding Distortion
BIAS Verlag Bremen (2011)
Journals (rev)
Agour, M.; Falldorf, C.; v. Koyplow, C.; Bergmann, R.B.
Automated compensation of misalignment in phase retrieval based on a
spatial light modulator
Applied Optics 50/24 (2011) 4779-4787
Gatzen, M.; Tang, Z.; Vollertsen, F.; Mizutani, M.; Katayama, S.
X-Ray Investigation of Melt Flow Behaviour Under Magnetic Stirring
Regime in Laser Beam Welding of Aluminium
Journal of Laser
Applications 23/3 (2011) 032002-1-10 (published online)
Gatzen, M.; Thomy, C.; Vollertsen, F.
Analytical Investigation of the Influence of the Spatial Laser Beam
Intensity Distribution on the
Keyhole Dynamic in Laser Beam Welding.
Lasers in Engineering (in print)
Hu, Z.
Realisation and application of size dependent FEM-simulation for deep
drawing of rectangular
work pieces
CIRP Journal of Manufacturing Science and Technology (2011)
90-95
Kamau, E. N.; Frerichs, F.; Geldmacher, J.; v. Kopylow, C.
In-Process Distortion Measurement During a Gas Quenching Process
Through Digital Speckle
Photography
Production Engineering Research and Development (2011)
5:167-173
Koerdt, M.; Vollertsen, F.
Fabrication of an integrated optical Mach-Zehnder interferometer based
on refractive index
modification of polymethylmethacrylate by krypton fluoride excimer
laser radiation
Applied Surface Science 257 (2011) 5237-5240
Rosenboom, L.; Kreis, T.; Jüptner, W.
Surface description and defect detection by wavelet analysis
Measurement Science and Technology 22 (2011) 045102-1-9
Sakkiettibutra, J.; Vollertsen, F.
Possibilities and limitations of geometric simplifications for
calculations of residual stresses and
distortions
Production Engineering Research & Development 5, 5 (2011)
485-495
Schwander, M.; Partes, K.
A review of diamond synthesis by CVD processes
Diamond & Related Materials 20 (2011) 1287-1301
Shams El-Din, M.; Koerdt, M.; Wochnowski, C.; Vollertsen, F.; Sadik,
A.
Ivestigation of a UV-laser generated waveguide in a planar polymer chip
unsing an improved
interfeometric method
Optics and Lasers in Engineering (2011) in print
Vollertsen, F.
Effects on the deep drawing diagram in micro forming
Production Engineering Research & Development (2011)
10.1007/s11740-011-0355-5
von Bargen, R.; Hu, Z.; Zoch, H.-W.; Vollertsen, F.
Effect of heat treatment on the hardness of micro deep drawn cups of
Al-2Sc
Materialwissenschaft
und Werkstofftechnik 42/11 (2011) 1035-1039
Yassien, K; Agour, M.
Digital Holographic Interferometry: Optomechanical Properties of
Fibers
Polymer
Engineering & Science 51 (2011) 1218-1225
Journals
Mehrafsun, S.; Zhang, P.; Vollertsen, F.; Goch, G.
Laserchemische Feinbearbeitung von Mikroumformwerkzeugen bei geringen
Laserleistungen
wt-Werkstatttechnik online 11/12 (2011) 770-774
Seefeld, T.
Verbesserung der Schweißeigung von Aluminium durch geeignete
Schweißzusatzwerkstoffe
Laser Magazin 2 (2011) 68-69
Thomy, C.
Aluminium-Stahl- und Aluminium-CFK-Mischverbindungen durch
laserbasierten Fügeprozessen
Laser Magazin 2 (2011) 22-23
Vollertsen, F.
IIW Kommission IV "Laser- und Elektronenstrahlschweißen" -
Visualisierung und Weiterentwicklung der Prozesstechnologien
Schweißen und Schneiden 63/1-2 (2011) 59-62
Vollertsen, F.; Grünenwald, S.
Laser and laser-hybrid welding of thick section material in scientific
and industrial applications
Journal of the Japan Welding Society Vol. 80/1 (2011) 94-101, also in
Japanese in "The Front Line of Welding Science and Technology in the
World" (2011) 94-101
Wang, N.; v. Kopylow, C.; Falldorf, C.; Bergmann, R. B.
Schnelle 3D-Formerfassung von Mikrotiefziehbauteilen mittels digitaler
Holografie
Photonik 4 (2011)
40-42
Wottschel, V., Thomy, C., Vollertsen, F.
Laserstrahlfügen integraler CFK-Metall-Verbindungen
Schweißen und Schneiden 63/7 (2011) 398
Proceedings
Agour, M.; Falldorf, C.; v. Koyplow, C.; Bergmann, R. B.
The effect of misalignment in phase retrieval based on a spatial light
modulator
SPIE Optical Metrology Munich - Optical Measurement Systems for
industrial inspection VII,
eds.: P. H. Lehmann, W. Osten, K. Gastinger. SPIE Bellingham WA (2011)
80820M-1-80820M-
10
Bill, A.; Bergmann, R. B.
Development of the grain size distribution during the Crystallization
of an Amorphous Solid
MRS Fall Meeting 2010, ed. R. Hühne. Cambridge University Press
Cambridge (2011) o. S.
Buschenhenke, F.; Babaei, M.
Influence of joint geometries on distortion during laser beam welding
of shaft-hub joints
3rd International Workshop on Thermal Forming and Welding
distortion (IWOTE 2011), ed. F.
Vollertsen. BIAS Verlag Bremen (2011) 1-13
Buschenhenke, F.; Seefeld, T.; Vollertsen, F.
Distortion control during laser beam welding of shaft-hub joints within
a process chain
Proc. of 30th ICALEO, LIA Congress Proceeding. CD-Rom 614 (2011)
427-434
Chongbunwatana, K.; Vollertsen, F.
Influence of weld pool geometry on workpiece distortion during laser
beam welding
3rd International Workshop on Thermal Forming and Welding
distortion (IWOTE 2011), ed. F.
Vollertsen. BIAS Verlag Bremen (2011) 35-48
Gatzen, M.; Tang, Z.; Vollertsen, F.
Effect of electromagnetic stirring on the element distribution in laser
beam welding of
aluminium with filler wire
Lasers in Manufacturing (LIM 2011), eds.: M. Schmidt, F. Zaeh, T. Graf,
A. Ostendorf. Elsevier
Amsterdam (2011) 56-65
Gatzen, M.; Tang, Z.; Vollertsen, F.
Magnetic stirring in laser beam welding of Al 99.5 with silicon
containing filler wire
Proc. Of the European Conference on Aluminium Alloys (ECAA 2011), ed.:
J. Hirsch (2011) 184-
186 (CD-Rom)
Grden, M.; Vollertsen, F.
In-process measurements of the mechanical behavior of aluminium sheets
during laser beam
forming
3rd International Workshop on Thermal Forming and Welding
Distortion (IWOTE’11), ed. F.
Vollertsen. BIAS Verlag Bremen (2011) 293-303
Hu, Z.; Vollertsen, F.
Optimisation of the blank shape for micro deep drawing of rectangular
parts
The 14th International Conference on Material Forming
(ESAFORM 2011), ed.: G. Menary.
American Institute of Physics (2011) 523-528 (online)
Hu, Z.; Wielage, H.; Vollertsen, F.
Forming Behavior of Thin Foils
14th International Conference on Sheet Metal (Sheet Metal
2011), eds.: J. R.Duflou, R.Clarke,
M. Merklein, F. Micari, B. Shirvani, K. Kellens. Trans Tech
Publications Zürich-Durnten (2011)
1008-1015
Kalms, M.; Peters, C.; Wierbos, r.
Assessment of Carbon Fiber-reinforced Polyphenylene Sulfide by Means of
Laser Ultrasound
Proc. of SPIE Nondestructive Characterization of Composite Materials,
Aerospace Engineering,
Civil Infrastructure and Homeland Security 2011, ed. F. Wu. SPIE
Bellingham (2011) o.S.
Kamau, E. N.; Falldorf, C.; v. Kopylow, C; Bergmann, R. B.
Robust Digital Speckle Photography Based on Radon and Fourier-Mellin
Transforms
International Conference on Optical Instrument and Technology (SPIE
2011), ed. L.Weber et al.
SPIE Bellingham WA (2011) 82020A-1-8
Kreis, T.; Rosenboom, L.; Jüptner, W.
Industrial Surface Inspection by Wavelet Analysis
Optical Measurement Systems for Industrial Inspection VII, Proc. of
SPIE Vol. 8082, eds.: P. H.
Lehmann, W. Osten, K. Gastinger. SPIE (2011) 808234-1-8
Kuhfuss, B.; Moumi, E.; Tracht, K.; Weikert, F.; Vollertsen, F.;
Stephen, A.
Process chains in microforming technology using scaling effects
International Conference on Material Forming (ESAFORM 2011), ed. G.
Menary. American
Institute of Physics (2011) 535-540 (online)
Meeser, T.; Falldorf, C.; v. Kopylow, C.; Bergmann, R. B.
Reference Wave Adaptation in Digital Lensless Fourier Holography by
means of a Spatial Light
Modulator
Optical Measurement Systems for Industrial Inspection VII, Proceedings
of SPIE, Vol. 8082, eds.:
P. H. Lehmann, W. Osten, K. Gastinger. SPIE München (2011)
808206-1-7
Möller, F.; Vollertsen, F.
Fluxless brazing of aluminum with a coaxial laser plasma joining
process
IIW Annual Assembly 2011 Com. XVII, Chennai, India (2011), paper no.
XVII-A-0020-2011
(online)
Sakkiettibutra, J.; Vollertsen, F.
Differences in the residual stress development between laser-formed
austenitic and mild steel
sheets
3rd Int. Workshop on Thermal Forming and Welding Distortion
(IWOTE’11), ed.: F.Vollertsen.
BIAS Verlag Bremen (2011) 145-167
Sandner, M., Li, W; v. Kopylow, C., Bergmann, R.B.
Einsatz von Messsystemen auf Basis der Streifenprojektions- und
Streifenreflexionstechnik zur
Konturmessung und Oberflächencharakterisierung
Proc. XXV. Messtechnisches Symposium (2011), eds.: F. P. Léon,
J.Beyerer. Shaker Verlag Aachen
(2011) 163-174
Stephen, A.; Gerhard, C.; Vollertsen, F.
Laser-chemical finishing of micro forming tools
Laser-based Micro- and Nanopackaging and Assembly V (LBMP-V) ed. W.
Pfleging, Y. Lu, K.
Washio, J. Amako, W. Hoving. SPIE (2011) 79210J-1-6 (CD Rom)
Tang, Z., Seefeld, T., Vollertsen, F.
Grain Refinement for Improved Weldability of Aluminium Alloys
European Conference on Aluminium Alloys (ECAA 2011), ed.: J. Hirsch
(2011) 198-200
Tang, Z.; Schempp, P.; Seefeld, T.; Schwenk, C.; Vollertsen, F.;
Kornfeinung beim WIG- und Laserstrahlschweißen von
Aluminiumlegierungen
Große Schweißtechnische Tagung 2011 (GST 2011) DVS Berichte Bd. 275
(2011) 153-160
Thomy, C.; Vollertsen, F.
Recent Developments in Laser Joining of Dissimilar Materials
Proc. 30th International Congress on Applications of Laser
Electro-Optics (ICALEO 2011), ed.: K.
Washio. LIA Orlando/Florida (2011) 333-342
Thomy, C.; Vollertsen, F.
Laser-Arc Hybrid Welding - Recent Advances in Research and
Application
Proc. IIW Com. IV Annual Assembly, July 17-21, 2011, Chennai, India.
IIW Doc. IV-1058-11
(online)
v. Kopylow, C.; Falldorf, C.; Dankwart, C.; Kibben, S.; Bergmann,
R.B.
Design, fabrication and applications of diamond turned holograms
Proceedings 2nd International Symposium on Functional Surfaces 2011,
eds.: E.Willenborg,B.
Heeskens. Fraunhofer ILT Aachen (2011) 7
Wang, N.; Falldorf, C.; v. Kopylow, C.; Bergmann, R. B.
Assessment of Digital Holography for 3D-Shape Measurement of Micro Deep
Drawing Parts in
comparison to Confocal Microscopy
Proc. of the Society for Experimental Mechanics (SEM 2011), ed. T.
Proulx. Springer Verlag
Berlin (2011) 93-98
Wielage, H.; Hu, Z.; Vollertsen, F.
Fracture Behavior of Thin Foils
6th International Conference on MicroManufacturing (ICOMM
2011), eds.: K. Dohda. Nagoya
Institute of Technology Nagoya, Japan (2011) 663-666
Wottschel, V.; Möller, F.; Thomy, C.; Vollertsen, F.; Schiebel, P.;
Herrmann, A. S.; Schimanski, K.;
Zoch, H. W.
Novel method for joining CFRP to aluminium
18. Symposium Verbundwerkstoffe und Werkstoffverbunde, ed. B. Wielage.
Eigenverlag
Chemnitz, Band 41 (2011) 338-345
Zeiler, M.; Seefeld, T.; Vollertsen, F.
Influence of gap and edge offset on weld distortions by MIG-welding on
aluminum alloys
3rd International Workshop on Thermal Forming and Welding
Distortion (IWOTE’11), ed. F.
Vollertsen. BIAS Verlag Bremen (2011) 15-23
also in: European Conference on Aluminium Alloys – ECAA (2011)
Proceedings (rev)
Buschenhenke, F.; Seefeld, T.; Vollertsen, F.
Strategies for reduced distortion during laser beam welding of
shaft-hub joints
3rd International Conference on Distortion Engineering (IDE 2011),
eds.: H.-W. Zoch, Th. Lübben
(2011) 303-311
Fan, J.; Thomy, C.; Vollertsen, F.
Effect of thermal cycle on the formation of intermetallic compounds in
laser welding of
aluminium-steel overlap joints
Lasers in Manufacturing (LIM 2011), eds.: M. Schmidt, F. Zaeh, T. Graf,
A. Ostendorf. Elsevier
Amsterdam (2011) 134-141
Gatzen, M.; Tang, Z.; Vollertsen, F.
Effect of electromagnetic stirring on the element distribution in laser
beam welding of
aluminium with filler wire
Lasers in Manufacturing (LIM 2011), eds.: M. Schmidt, F. Zaeh, T. Graf,
A. Ostendorf. Elsevier
Amsterdam (2011) 56-65
Goecke, S.-F.; Hübner, Szczesny, M. Wilden, J.; Möller, F.; Thomy,
C.
Joining and Repair of Aluminium-Steel Mixed Joints
16. International Conferenz on the Joining of Materials (JOM).
Helsingor, Denmark (2011) 1-7
Hu, Z.; Vollertsen, F.
Auslegung von Mikrotiefziehwerkzeugen zur Bestimmung der
Werkzeuglebensdauer
5. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, eds.: O.
Kraft, A. Haug, F.
Vollertsen, S. Büttgenbach. KIT Scientific Publishing Karlsruhe (2011)
191-196
Hu, Z.; Vollertsen, F.
Investigation on the optimisation of the blank shape for micro deep
drawing of rectangular
parts
Steel Research International , Special Edition: 10th Int. Conf. on
Technology of Plasticity (ICTP
2011), eds.: G.Hirt, A. E. Tekkaya. Wiley-VCH Weinheim (2011)
974-978
Kamau, E. N.; v. Kopylow, C.; Sakkiettibutra, J.; Mundt, J.
Monitoring a Laser Beam Heat Treatment Process by Means of Digital
Speckle Photography
Proc. 3rd Int. Conf. on Distortion Engineering (IDE2011), eds.: H.-W.
Zoch, Th. Lübben. Bremen
(2011) 591-597
Köhler, H.; Partes, K.; Seefeld, T.; Vollertsen, F.
Influence of laser reconditioning on fatigue properties of
crankshafts
Lasers in Manufacturing (LIM 2011), eds.: M. Schmidt, M. F. Zaeh, T.
Graf. Elsevier B.V.
Amsterdam (2011) 512-518
Kuhfuss, B.; Moumi, E.; Tracht, K.; Weikert, F., Vollertsen, F.;
Stephen, A.
Process chains in microforming technology using scaling effects
International Conference on Material Forming (ESAFORM 2011), ed. G.
Menary. American
Institute of Physics (2011) 535-540 (online)
Möller, F.; Grden, M.; Thomy, C.; Vollertsen, F.
Combined laser beam welding and brazing process for aluminium -
titanium hybrid structures
Lasers in Manufacturing (LIM 2011), eds.: M. Schmidt, F. Zaeh, T. Graf,
A. Ostendorf. Elsevier
Amsterdam (2011) 215-223
Sakkiettibutra, J.; Kamau, E.N.
Influence of austenitization and transformation hardening on the
residual stress development
of laser beam treated components made of 20MnCr5
Proc. 3rd Int. Conf. on Distortion Engineering (IDE2011), eds.: H.-W.
Zoch, Th. Lübben. Bremen
(2011) 295-302
Stephen, A.
Mechanisms and applications of laser chemical machining
Lasers in Manufacturing (LIM 2011), eds.: M. Schmidt, F. Zaeh, T. Graf,
A. Ostendorf. Elsevier
Amsterdam (2011) 261-267
Stephen, A.; Brüning, H.; Vollertsen, F.
Fokuslagensteuerung beim laserbasierten Stoffanhäufen
5. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, eds.: O.
Kraft, A. Haug, F.
Vollertsen, S. Büttgenbach. KIT Publishing Karlsruhe (2011)
155-160
Stephen, A.; Vollertsen, F.
Influence of the rod diameter on the upset ratio in laser-based free
form heading
Steel Research International , Special Edition: 10th Int. Conf. on
Technology of Plasticity (ICTP
2011), eds.: G.Hirt, A. E. Tekkaya. Wiley-VCH Weinheim (2011)
220-223
Tang, Z.; Seefeld, T.; Vollertsen, F.
Grain Refinement by Laser Welding of AA 5083 with Addition of
Ti/B
Lasers in Manufacturing (LIM 2011), eds.: M. Schmidt, F. Zaeh, T. Graf,
A. Ostendorf. Elsevier
Amsterdam (2011) 123-133
Zhang, P.; Mehrafsun, S.; Lübke, K.; Goch, G.; Vollertsen, F.
Laserchemische Feinbearbeitung und Qualitätsprüfung von
Mikrokaltumformwerkzeugen
5. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, eds.: O.
Kraft, A. Haug, F.
Vollertsen, S. Büttgenbach. KIT Publishing Karlsruhe (2011) 169-176
Proceedings (invited)
Kreis, T.
Holographic Approach to 3D-Television
Proc. of 22nd International Congress of the International Commission
for Optics: Light for the
Development of the World (invited paper), ed.: R. Rodriguez-Vera, R.
Diaz-Uribe (2011)
80110H-1-10
Proceedings (Keynote)
Vollertsen, F.
Size Effects in Micro Forming
14th International Conference on Sheet Metal (Sheet Metal
2011), eds.: J. R.Duflou, R.Clarke,
M. Merklein, F. Micari, B. Shirvani, K. Kellens. Trans Tech
Publications Zürich-Durnten (2011) 3-12
Wielage, H.; Vollertsen, F.
Undercuts by Laser Shock Forming
The 14th International Conference on Material Forming
(ESAFORM 2011), ed.: G. Menary.
American Institute of Physics (2011) 1309-1312 (online)
Vollertsen, F.; Wielage, H
Advances in Micro Cold Forming
Proceeding of PLASTICITY 11, ed.: A. S. Khan. NEAT PRESS Fulton,
Maryland (2011) 226-228
Poster
Dankwart, C.; Falldorf, C.; v. Kopylow, C.; Bergmann, R.B.
Hybrid diamond turning technologies for the generation of diffractive
masks for 3D-
lithography and multiple wavelength diffractive optical elements - 3D
Multicolor
2nd International Symposium on Functional Surfaces, Aachen
(14.-15.9.2011)
Focke, O.; Kalms, M.; Huke, P.; v. Kopylow, C.; Bergmann, R.B.; Skupin,
J.; Wilken, R.
Kontrollierte und zerstörungsfreie Anregung von Stoßwellen zur Öffnung
von Kissing Bonds
Poster auf der DGZFP-Tagung, Bremen (30.05.2011)
Huke, P.; Focke, O.; Petker, A.; Reucher,
Verzugsspannungen an CFK-Bauteilen mittels Ultraschallwellen
berührungslos erfassen
Poster auf der DGZFP Jahrestagung 2011, Bremen
(30.05.-02.06.2011)
Talks
Kalms, M.; Peters, C.; Wierbos, R.
Assessment of Carbon Fiber-reinforced Polyphenylene Sulfide by Means of
Laser Ultrasound
SPIE Conference on Nondestructive Characterization for Composite
Materials, Aerospace
Engineering, Civil Infrastructure, and Homeland Security V, San Diego
2011
Köhler, H.; Li, Z.; Vollertsen, F.; Huang, J. Ke, Z.
Industrial Laser Technology with High Power Diode Lasers - an example
of succesful Sino-
German Cooperation
VI International Conference on Laser Processes and Components (LPC
2011), Shanghai/China
(16.03.2011)
Kühnle, T.; Cui, C.; Partes, K.; Schulz, A.; Zoch, H.-W.; Vollertsen,
F.
Selektives Laserschmelzen von Mikroumformwerkzeugen aus Werkzeugstahl
mittels
Overspraypulver vom Sprühkompaktieren
Kolloquium Mikroproduktion, Karlsruhe (11.10.2011)
Sandner, M., Li, W.; Bothe, T.; Burke, J.; v. Kopylow, C., Bergmann, R.
B.
Absolut-Abstandsreferenz für die Streifenreflexionstechnik zur
Verringerung systematischer
Messfehler
DGaO-Proceedings (2011) 0287-2011-A002-8 (online)
Thomy, C.; Vollertsen, F.
Laserstrahlschweißen im Dickblechbereich – Herausforderungen und
Lösungen
Forum Alte Werft Papenburg (11.05.2011
Thomy, C.; Vollertsen, F.
Aktuelle Entwicklungen beim thermischen Fügen von
Aluminium-Stahl-Mischverbindungen
Große Schweißtechnische Tagung 2011, Hamburg (28.09.2011)
Vollertsen, F.
Größeneffekte in Modellen und der Simulation
Ehrenkolloquium Prof. Roll, Hersching (22.09.2011)