As far as possible, links are given to the original sources.

Journals (rev)

Agour, M.; Falldorf, C.; v. Koyplow, C.
Digital pre-filtering approach to improve optically reconstructed wavefields in opto-electronic
holography
Journal of Optics A: Pure and Applied Optics 12 (2010) 055401-1-7

Baumeister, M.; Scholz, T.; Dickmann, K.; Vollertsen, F.
Influence of Mie-scattering on high-speed micro-perforation considering brilliant laser radiation
Journal of Laser Applications, 22/2 (2010) 48-55

Bothe, T.; Li, W.; Schulte, M.; v. Kopylow, C.; Bergmann, R. B.; Jüptner, W.
Vision Ray Calibration for the Quantitative Geometric Description of General Imaging and
Projection Optics in Metrology
Applied Optics 49/30 (2010) 5851-5860

Dankwart, C.; Falldorf, C.; Gläbe, R.; Lünemann, B.; v. Kopylow, C.; Bergmann, R. B.
Design of diamond turned holograms incorporating properties of the fabrication process
Applied Optics 49 (2010) 4949-4955

Falldorf, C.; Agour, M.; v. Kopylow, C.; Bergmann, R. B.
Phase retrieval by means of a spatial light modulator in the fourier domain of an imaging system
Applied Optics 49/10 (2010) 1826-1830

Gerhard, C.; Stephen, A.; Vollertsen, F.
Limits for interferometric measurements on rough surfaces in streaming inhomogeneous media
Production Engineering 4/2 (2010) 141-146

Gerhard, C.; Vollertsen, F.
Ein modifiziertes Bath-Interferometer zur Profilmessung von Mikrostrukturen
tm - Technisches Messen 11 (2010), 579-582

Grünenwald, S.; Seefeld, T.; Vollertsen, F.; Gook, S.; Gumenyuk, A.; Rethmeier, M.
Laserstrahl-MSG-Hybridschweißen dicker Bleche aus Rohrleitungsstahl mit Faserlasern hoher
Leistung
Schweißen und Schneiden 62 (2010) 338-347

Koerdt, M.; Vollertsen, F.
Fabrication of an integrated optical Mach-Zehnder interferometer based on refractive index
modification of polymethylmethacrylate by krypton fluoride excimer laser radiation
Applied Surface Science (2010) in press

Mujica, L.; Weber, S.; Pinto, H.; Thomy, C.; Vollertsen, F.
Microstructure and Mechanical Properties of Laser Welded Joints of TWIP and TRIP Steels
Materials Science and Engineering A 527 (2009) 2071-2078

Stephen, A.; Vollertsen, F.
Mechanisms and processing limits in laser thermochemical machining
CIRP Annals Manufacturing Technology 59 (2010) 251-254

Teran, A.; Bill, A.; Bergmann, R. B.
Time evolution of the grain size distributions in random nucleation and growth crystallization
processes
Physical Review B 81 (2010) 075319-1-19

Vollertsen, F.; Grünenwald, S.; Rethmeier, M.; Gumenyuk, A.; Reisgen, U.; Olschock, S.
Welding of thick steel plates using fibre lasers and GMAW
Welding in the World, Vol. 54/3-4 (2010) R62-R70
auch in: Proc. IIW International Institute of Welding Commission IV Annual Assembly, Graz,
Austria, 06.-11.07.2008, IIW Doc. Nr. IV-965-08 (CD)

Vollertsen, F.; Hu, Z.
Analysis of punch velocity dependent process window in micro deep drawing
Production Engineering - Research and Development (online) DOI 10.1007/s11740-010-0241-6

Vollertsen, F.; Hu, Z.; Stock, H.; Köhler, B.
On the limit drawing ratio of magnetron sputtered aluminium-scandium foils within micro
deep drawing
Production Engineering - Research and Development (2010) DOI 10.1007/s11740-010-0229-2
(online)

Vollertsen, F; Partes, K.; Schubnov, A.
Thin nanocrystalline diamond films deposited by LaPlas-CVD at atmospheric pressure
Production Engineering 4/1 (2010) 9-14

Wielage, H.; Vollertsen, F.
Classification of laser shock forming within the field of high speed forming processes
Journal of Materials Processing Technology (2010) online

Yassien, K.; Agour, M.; v. Koyplow, C.; Dessouky, H.
On the Digital Holographic Interferometry of Fibrous Materials, I: Optical Properties of Polymer
and Optical Fibers
Optics and Lasers Engineering 48 (2010) 555-560

Journals

Bernasovsky, P.; Hamak, I.; Palo, M.; Grünenwald, S.; Seefeld, T.; Vollertsen, F.
Vlastnosti tvarov rurovej ocele L485MB zhotovenych hybridnou metodou MAG s
vysokovykonnym vlaknovym laserom (Properties of high power fibre laser hybrid welds of
L485MB pipe steel
Zvaranie Svarovani, 7-8, 59 (2010) 147-154

Brenner, N.; von Bargen, R.; Hu, Z.; Lübke, K.
Vom Blech zum gehärteten Mikronapf
Mikroproduktion 04/10 (2010) 32-35

Cuypers, P.; v. Freyberg, A.; Goch, G.; Stephen, A.; Vollertsen, F.
Modellgestützte Prozessplanung zur laserchemischen Herstellung von Mikroumformwerkzeugen
TM Technisches Messen 77/4 (2010) 229 - 236

Gerhard, C.; Doll, R.; Partes, K; Vollertsen, F.
Licht als Werkzeug im Werkzeugbau
optolines 23 (2010) 11-13

Gerhard, C.; Stephen, A.; Vollertsen, F.
Die Chemie stimmt - Laserchemische Mikromaterialbearbeitung erlaubt eine hohe
Bearbeitungsqualität bei geringer Laserleistung.
Laser+Photonik 1 (2010) 42-44

Gerhard, C.; Vollertsen, F.
Laser in der Mikrotechnologie
Industrie Management 26/6 (2010) 33-36

Gerhard, C.; Vollertsen, F.
Interferometrische Profilmessung in der laserchemischen Mikromaterialbearbeitung
Photonik 4 (2010) 22-35

Grden, M.; Sakkiettibutra, J.; Vollertsen; Johnigk, C.; Emonts, M.; Brecher, C.; Eckert, M.
Prozessauslegung beim laserstrahlunterstützten Stanzen
Laser Technik Journal 7 (2010) 36-41

Grünenwald, S.
Technical aspects of welding X70 pipe steel with high power fibre laser-GMA-hybrid welding
The Laser User 58 (2010) 34-35

Grünenwald, S.; Seefeld, T; Vollertsen, F.
Laser-Hybridschweißen mit dem Faserlaser - Ansätze für einen wirtschaftlichen Schweißprozess
in der Rohrherstellung
Laser 3, 42 (2010) 24-27

Möller, F.; Thomy, C.; Vollertsen, F.
Flussmittelfreies Hartlöten von Aluminiumlegierungen mit einem koaxialen Laser-Plasma-
Hybridlötprozess
Schweißen und Schneiden 62/5 (2010) 294

Reitemeyer, D.; Seefeld, T.; Vollertsen, F.; Bergmann, J.-P.
Laserinduzierter Fokus Shift beim Schweißen mit Hochleistungs-Faserlasern
Laser Magazin 2 (2010) 8-10

Reitemeyer, D.; Seefeld, T.; Vollertsen, F.; Bergmann, J. P.
The influence of laser-induced focus shift on high power fiber laser welding
The Laser User 59 (2010) 30-31

Stephen, A.; Gerhard, C.; Vollertsen, F.
Präzisionsbearbeitung mit dem Laser - vom Stoffabtragen bis zum Stoffanhäufen
wt Werkstatttechnik online 11/12 (2010) 842-846

Stephen, A.; Moumi, E.
Rundkneten lasergenerierter Köpfe - Ein interessanter Prozess für die Serienfertigung von
Mikrobauteile
INNO 45 (2010) 9

Stephen, A.; Vollertsen, F.
In die Tiefe gezogen
Mikroproduktion 3 (2010) 36-37

Thomy, C.; Seefeld, T.; Vollertsen, F.
Laser-MSG-Hybridschweißen im Dünnblechbereich
wt Werkstattstechnik online 100/3 (2010) 211-216

Proceedings

Agour, M.; Huke, P.; v. Kopylow, C.; Falldorf, C.
Shape Measurement by Means of Phase Retrieval using a Spatial Light Modulator
International Conference on Advanced Phase Measurement Methods in Optics and Imaging,
eds.: P. K. Rastogi, E. Hack. American Institute of Physics (2010) 265-270

Bill, A.; Lokovic, K. S.; Bergmann, R. B.
Grain size distribution in crystallization processes with anisotropic growth rate
MRS Spring Meeting, Symposium A , Vol. 1245 (2010) 1245-A16-07 (online)

Buschenhenke, F.; Hofmann, M.; Seefeld, T.; Vollertsen, F.
Distortion and residual stresses in laser beam welded shaft-hub joints
Proc. of 29^th ICALEO, LIA Congress Proceedings CD-ROM 613 (2010) 389-397

Dankwart, C.; Falldorf, C.; Gläbe, R.; Lünemann, B.; v. Kopylow, C.; Bergmann, R. B.
Modeling of the optical behavior of diamond turned holograms
EOS Topical Meeting on Diffractive Optics 2010 Digest (EOS 2010). European Optical Society
(2010) 2488 (online)

Falldorf, C.; Agour, M.; v. Kopylow, C.; Bergmann, R. B.
Design of an Optical System for Phase Retrieval based on a Spatial Light Modulator
AIP Conference Proceedings Volume 1236 (International Conference on Advanced Phase
Measurement Methods in Optics and Imaging), eds.: P. K. Rastogi, E. Hack. Locarno,
Switzerland (2010) 259-264

Gerhard, C.; Stephen, A.; Vollertsen, F.
Lasermikrostrukturierung in der industriellen Anwendung
Laser in der Elektronikproduktion & Feinwerktechnik (LEF), eds.: M. Schmidt, M. Geiger, C.
Kägeler. Meisenbach Bamberg (2010) 115-121

Gerhard, C.; Vollertsen, F.
Interferometric in-process measurement of free-form surfaces in laser chemical manufacturing
Proc. of the 11^th International Symposium onLaser-Precision Microfabrication (LPM2010),
Hrsg.: Japan Laser Processing Society (2010) paper no. 10-38 (online)

Grden, M.; Mundt, J.; Vollertsen, F.
Energy distribution characteristics at defocused laser heating along high curvature paths
Proc. Of the 5^th int. Conf. MATHEMATICAL MODELING AND INFORMATION TECHNOLOGIES IN
WELDING AND RELATED PROCESSES, ed.: V. I. Makhnenko. E.O. Paton Electric Welding
Institute of the NAS Kiev (2010) 33-37

Holtz, R.; Seefeld, T.
Auswertung der Umfrage zum DVS-Forschungsseminar 2010 "Strahlschweißen von Aluminium"
DVS-Forschungsseminar, DVS-Berichte Band 266. DVS Media GmbH, Düsseldorf (2010) 68-72

Hu, Z.; Vollertsen, F.
Effect of size and velocity dependent friction in deep drawing on the process window
Proc. of the 4^th International Conference on Tribology in Manufacturing Processes (ICTMP 2010), eds. E. Felder, P. Montmitonnet. Transvalor Paris (2010) 583-592

Hu, Z.; Wielage, H.; Vollertsen, F.
Effect of strain rate on the forming limit diagram of thin aluminum foil
Proc. of the International Forum on Micro Manufacturing (IFMM'10), ed.: K. Dohda. Nagoya
Institute of Technology Nagoya (2010) 181-186

Huferath-von Lüpke, S.; v. Kopylow, C.; Geldmacher, J.; Kreis, T.
Digital holographic recording using spatially resolved multi wavelength
Optical Data Storage, ed.: S. Orlic, R. Katayama. SPIE (2010) 773005-1-9

Möller, F.; Thomy, C.; Vollertsen, F.
Joining of titanium-aluminium seat tracks for aircraft applications - system technology and
joint properties
IIW Assembly 2010 Com. XVII Istanbul, Turkey (2010) IIW-Doc. XVII-0005-2010 (CD-Rom)

Mundt, J.; Sakkiettibutra, J.; Vollertsen, F
Modelling of the temperature-dependent absorption in laser heating process
Proc. of the 5^th int. conf. MATHEMATICAL MODELING AND INFORMATION TECHNOLOGIES IN
WELDING AND RELATED PROCESSES, ed.: V. I. Makhnenko. E.O. Paton Electric Welding
Institute of the NAS Kiev (2010) 171-175

Reitemeyer, D.; Seefeld, T.; Vollertsen, F.
Online Focus Shift Measurement in High Power Fiber Laser Welding
Proc. 29^th int. Cong. On Applications of Lasers and Electro-Optics (ICALEO 2010) LIA
Publication 613 (CD) paper 101, 13-20

Seefeld, T.
Centr-Al - Lösungen für das Schweißen von Aluminium im Fahrzeugbau
7. Laser-Anwenderforum (LAF'10), ed. F.Vollertsen, D. Reitemeyer. BIAS-Verlag Bremen, Bd. 40
(2010) 129-142

Tang, Z.; Gatzen, M.; Vollertsen, F.
Experimental investigation of the melt flow in Aluminum during laser welding with magnetic
stirring
Pacific International Conference on Applications of Lasers & Optics (PICALO’10) paper 403 (CD-
Rom)

Thomy, C.; Möller, F.; Vollertsen, F.
Distortion effects in micro welding with single-mode fibre laser
IIW Annual Assembly 2010 Com. IV, Istanbul, Turkey (2010) IIW-Doc. IV-1025-10 (CD-Rom)

Thomy, C.; Möller, F.; Vollertsen, F.
Distortion effects in micro welding with fibre laser
Proc. 29^th int. Cong. On Applications of Lasers and Electro-Optics (ICALEO 2010) LIA
Publication 613 (CD) paper 301, 85-90

Thomy, C.; Seefeld, T.; Vollertsen, F.
Gap tolerant Laser GMA hybrid welding process for thin sheet materials
IIW Annual Assembly 2010 Com. XII, Istanbul, Turkey (2010) IIW-Doc. XII-1991-10 (CD-Rom)

Thomy, C.; Seefeld, T.; Vollertsen, F.
Spalttolerantes Laser-MSG-Hybridschweißen von Feinblechen mit dem Single-mode-Faserlaser
Proc. 8. Internationale Konferenz Strahltechnik (2010) 61-64

Thomy, C.
Ideen in die Praxis - Begleitung industrieller Anwender im Entwicklungsprozess
7. Laser-Anwenderforum (LAF'10), ed. F.Vollertsen, D. Reitemeyer. BIAS-Verlag Bremen, Bd. 40
(2010) 63-74

Wielage, H.; Vollertsen, F.
Influence of different process parameters on deformation velocity in laser shock forming
International Conference on High Speed Forming (ICHSF 2010), Hrsg. G. Daehn, Y. Zhang, K.
Babusci, C. Weddeling, M. Marré, E. Tekkaya. Manufacturing Institute Ohio und das Institut für
Umformtechnik und Leichtbau Dortmund (2010) 285-294

Zhang, P.; Cuypers, P.; Gerhard, C.; von Freyberg, A.; Stephen, A.; Goch, G.; Vollertsen, F.
Control model for laser chemical machining of micro forming tools
Proc. of 2^nd CIRP International Conference on Process Machine Interactions, Vancouver,
Canada (2010) CD-Rom

Proceedings (rev)

Buschenhenke, F.; Hofmann, M.; Seefeld, T.; Vollertsen, F.
Distortion and residual stresses in laser beam weld shaft-hub joints
Laser Assisted Net shape Engineering (LANE 2010), eds.: M. Schmidt, F. Vollertsen, M. Geiger,
Physics Procedia 5 (2010) 89-98

Falldorf, C.; Kopylow, C.; Agour, M.; Bergmann, R. B.
Measurement of Thermally induced Deformations by means of Phase Retrieval
Proc. of the International Symposium on Optomechatronic Technologies (ISOT 2010), eds.: F.
Janabi-Sharifi, J. Kofman. IEEE (2010) 1-5

Gatzen, M.; Tang, Z.
CFD-based model for melt flow in laser beam welding of aluminium with coaxial magnetic field
Laser Assisted Net Shape Engineering (LANE 2010), Physics Procedia 5/2, eds.: M. Schmidt, F.
Vollertsen, M. Geiger. Meisenbach Bamberg (2010) 317-326

Grünenwald, S.; Seefeld, T.; Vollertsen, F.; Kocak, M.
Solutions for joining pipe steels using laser and laser-GMA-hybrid welding processes
Laser Assisted Net shape Engineering (LANE 2010), eds.: M. Schmidt, F. Vollertsen, M. Geiger
auch in: Physics Procedia 5 (2010) 77-87

Hildebrand, A.;Falldorf, C.; v. Kopylow, C.; Bergmann, R. B
Resolution Enhancement by Time-multiplexed Acquisition of Sub-pixel Shifted Images
Employing a Spatial Light Modulator
Proc. of the International Symposium on Optomechatronic Technologies (ISOT 2010), eds.: F.
Janabi-Sharifi, J. Kofman. IEEE (2010) 1-6

Huferath-von Lüpke, S.; Baumbach, T.; Kolenovic, E.; Falldorf, C.; v. Kopylow, C.
Digital Alignment of a reconstructed Hologram for Measurement of Deterioration of Tools
36^th International MATADOR Conference, eds.: S. Hinduja, L. Li. Springer Verlag London (2010)
331-334

Köhler, H.; Partes, K.; Seefeld, T.; Vollertsen, F.
Laser reconditioning of crankshafts: From lab to application
Laser Assisted Net Shape Engineering (LANE 2010), Physics Procedia 5/2, eds.: M. Schmidt, F.
Vollertsen, M. Geiger. Meisenbach Bamberg (2010) 387-397

Loose, T.; Sakkiettibutra, J.; Wohlfahrt, H.
New 3D-calculations of residual stresses consistent with measured results of the IIW round
robin programme
Mathematical Moedelling of Weld Phenomena 9, eds.: H. Cerjak, N. Enzinger. Technische
Universität Graz (2010) 369-390

Meeser, T.; v. Kopylow, C.; Falldorf, C.
Advanced digital lensless fourier holography by means of a spatial light modulator
3DTV-Conference: The True Vision - Capture, Transmission and Display of 3D Video (3DTV-CON),
ed.: A. Gotchev, L. Onural. IEEE (2010) 1-4

Möller, F.; Thomy, C.; Vollertsen, F.; Schiebel, P.; Hoffmeister, C.; Herrmann, A. S.
Novel method for joining CFRP to aluminium
Laser Assisted Net Shape Engineering (LANE 2010), Physics Procedia 5/2, eds.: M. Schmidt, F.
Vollertsen, M. Geiger. Meisenbach Bamberg (2010) 37-45

Reitemeyer, D.; Seefeld, T.; Vollertsen, F.
Online Focus Shift Measurement in High Power Fiber Laser Welding
Laser Assisted Net shape Engineering (LANE 2010), eds.: M. Schmidt, F. Vollertsen, M. Geiger
auch in: Physics Procedia 5 (2010) 455-463

Stephen, A.; Vollertsen, F.
Upset ratios in laser based free form heading
Laser Assisted Net Shape Engineering ( LANE 2010) Physics Procedia 5/2, eds.: M. Schmidt, F.
Vollertsen, M. Geiger. Meisenbach Bamberg (2010) 227-232

Tang, Z.; Gatzen, M.
Influence on the dilution by laser welding of aluminum with magnetic stirring
Laser Assisted Net Shape Engineering (LANE 2010) Physics Proceedia 5/2, eds.: M. Schmidt, F.
Vollertsen, M. Geiger.
Meisenbach Bamberg (2010) 125 - 137

Vollertsen, F.; Hu, Z.; Wielage, H.; Blaurock, L.
Fracture Limits of Metal Foils in Micro Forming
36^th International MATADOR Conference, eds.: S. Hinduja, L. Li. Springer Verlag London (2010)
49-52

Vollertsen, F.; Sakkiettibutra, J.
Different methods to use a laser as a forming tool
Laser Assisted Net shape Engineering (LANE 2010), eds.: M. Schmidt, F. Vollertsen, M. Geiger,
Physics Procedia 5 (2010) 193-203

Wang, N.; v. Kopylow, C.; Falldorf, C.
Rapid shape measurement of micro deep drawing parts by means of digital holographic
contouring
36^th International MATADOR Conference, eds.: S. Hinduja, L. Li. Springer Verlag London (2010)
45-48

Proceedings (invited)

Falldorf, C.; v. Kopylow, C.; Bergmann, R. B.
Liquid Crystal Spatial Light Modulators in Optical Metrology
Proc. of the 9^th Euro-American Workshop on Information Optics, eds.: T. J. Naughton, B.
Javidi. IEEE (2010) 1-3

Seefeld, T.; Gumenyuk, A.
Prozessverständnis beim Strahlschweißen von Aluminium
DVS-Forschungsseminar, DVS-Berichte Band 266. DVS Media GmbH, Düsseldorf (2010) 45-51

Vollertsen, F.; Doll, R.
Laser generated coatings for enhanced tribological behaviour
6^th Int. Conf. Beam Technologies and Laser Applications (BTLA09), ed.: G. Turichin, Saint-
Petersburg state polytechnic university, St. Petersburg (2009) 267-275
auch in: Science and Technology of Advanced Materials (2009) online

Vollertsen, F.; Thomy, C.
Laser-Arc Hybrid Welding - Recent Advances in Research and Application
4^th Pacific International Conference on Applications of Lasers and Optics (PICALO'10) paper
501 (CD-Rom)

Proceedings (Keynote)

Books

Schmidt, M.; Vollertsen, F.; Geiger, M. (Hrsg.)
Laser Assisted Net Shape Engineering 6, Proc. of the LANE 2010
Elsevier B.V. Amsterdam (2010

Vollertsen, F.; Reitemeyer, D. (Hrsg.)
Laserstrahlfügen: Prozesse, Systeme, Anwendungen, Trends
BIAS Verlag Bremen (2010)

Talks

Bergmanm, R. B.; Bothe, T.; Falldorf, C.; Huke, P.; Kalms, M.; v. Kopylow, C.
Optical Metrology and Optical Non-Destructive Testing from the Perspective of Object
Characteristics
SPIE Optical Engineering + Application, Interferometry XV: Applications Vol. 7791, Bellingham,
WA, USA (2010) 1-15

Hu, Z.; Schubnov, A.; Vollertsen, F.
Tribological behaviour of DLC-films and their application in micro deep drawing
Diamond 2010, Budapest/Ungarn (September 2010)

Huferath-von Lüpke, S.; Kebbel, V.; Bock, M.; Grunwald, R.
Simulation of pulsed Bessel-like beams
Laser Optics Berlin (2010)

Sakkiettibutra, J.; Vollertsen, F.
Possibilities and limitations of geometric simplifications for calculations of residual stresses and
distortions
Proc. of the 1^st German-Chinese Workshop on Welding Simulation (21.10.2010)

Seefeld, T.
Prozessverständnis beim Strahlschweißen von Aluminium
DVS-Forschungsseminar, Stuttgart (28.01.2010)

Thomy, C.; Vollertsen, F.
Neuere Entwicklungen beim Fügen von Mischverbindungen mit laserbasierten Verfahren
Bayerisches Laserseminar: Fügen artungleicher Metalle, Erlangen (29.04.10)
(eingeladener Vortrag)

Vollertsen, F.; Hu, Z.
Advances in microforming
1. Int. Con. on Metall Forming 2010, Ankara/Türkei (14.10.10)

Vollertsen, F.; Reitemeyer, D.
Chancen und Herausforderungen durch die Strahlqualität für die Materialbearbeitung
4. Primes Workshop, Seeheim-Jugenheim (07.09.10)

Vollertsen, F.; Sakkiettibutra, J.
… laser as a forming tool
LANE 2010 Erlangen (24.09.10)